Fluid turbine flow meter
- Product Description
Specifications:
Medium:Liquid Type:Turbine
Housing:Stainless 304(Optional Stainless 316 or PVC)
Bearing and Shaft:Tungsten Carbide
Rotor:2Cr13 Stainless Steel(Optional Alloy CD4Mcu)
Rings:Stainless 316
Protection Level:IP65
Operating temperature:-10°C to +55°C
Medium temperature:-20°C to +110°C
Working pressure:63 Bar for Thread,25 Bar for Flange
Thread or Flange connection
Pulse output(Low Level: ≤0.8V; High Level: ≥8V) or 4-20mA DC current signal or RS485
Signal Transmission Distance: ≤1,000 m
Explosion Proof can be available
Power supply:12-24VDC
Electronic Choice: Resettable/ Cumulative,Calibration in (M3/h),Gallons and Litres per minute(GPM&LPM)
K-factor:3-Point Correction and Non-linearity Compensation
Note: The K-Factor represents the number of output pulses transmitted per cubic meter (Optional: Liter and Gallons) of fluid passing through the turbine meter. Each turbine has a unique K-Factor. However, turbine meters are not functionally consistent throughout the full flow range of the meter. Therefore,correction and non-linearity compensation on K-Factor can enhance accuracy.
Advantage:
² High accuracy ±0.5 ~ ±1.0%R
² High pressure durability
² Small/compact dimension and light weight,easy to install and maintainance
² Good anti-vibration performance
Notice:
² Install the flow meter by the qualified technicians according to related standard
² When the Flowmeter is installed at explosion hazard field, DON’T remove the COVERPLATE when the meter is powered.
² Adding a filter equipment is recommended when the liquid includes impurities.
² Do not blow compressed air through the Turbine.
² Handle the rotor carefully. Even small scratches or nicks can affect accuracy.
² For best results, calibrate the meter at least 1 time per year.
² Turbine flow meters are designed to measure flow in only one direction. The direction
² is indicated by the arrow on the body
- Related Products
- [Return Home] [Print] [Go Back]